Professional 2×10″ coaxial monitor speaker system: 500W@8Ω, 70Hz-18kHz (±3dB) precise response, 96dB sensitivity, H110°×V90° coverage. Powered by CLASS-D amp (400W×4@8Ω), features DSP crossover, <0.2% THD, 106dB SNR, and full protection (short/thermal/overvoltage). Eco-friendly black paint.
Technical Specifications
Speaker System Specifications:
Power Rating: 500W
Impedance: 8 Ohms
System Type: 2×10″ High Efficiency 2-Way
Frequency Range: 60Hz-20KHz (-10dB)
Frequency Response: 70Hz-18KHz (±3dB)
Sensitivity: 96dB
Coverage Angle: H110°×V90°
Max SPL: 124dB
Coaxial Drivers: 10″×2
Surface Treatment: Black Water-Based Eco-Friendly Paint
Amplifier Specifications:
Amplifier Type: CLASS-D
Crossover Mode: DSP Electronic Crossover Supported
Power Rating: 400W×4 @ 8Ω
Frequency Response: 20Hz-20kHz +0.5dB/-0.5dB
THD @ 1kHz (Unweighted): <0.2%
Damping Factor: >500
Slew Rate: >32V/µs
Signal-to-Noise Ratio: ≥106dB
Sensitivity: Balanced 0.77V, Unbalanced 1.4V
Channel Separation @ Rated Power (8Ω, 1kHz): 78dB
DSP Sampling Rate: 48kHz / 24-bit
DSP Processor: Yes
Operating Voltage: AC 110-250V 50Hz-60Hz
Protection Features: Short Circuit, DC, Thermal, Peak Limiting, Overvoltage, Undervoltage, Soft Start
